Furuno LS-6100

furuno_LS_6100Standard Features :

- Waterproof, 6 Inch, Silver Brite Monochrome LCD Display
- Targets presented in up to 4 gray tones
- Picture resolution of 240(H) x 320(V) pixels
- 300 Watt RMS (2400 P-P) output power
- Seven depth scales, from 0-10 to 0-640 feet
- Depth offset to 1,500 feet, maximum depth scale of 3,000 feet
- Automatic or Manual Depth Range and Gain Adjustment
- A-Scope for rapid fish detection and species identification
- White Line Mode for enhanced bottom fish detection
- Audible and Visual, Temp, Speed, Fish or Bottom Alarm
- TLL output sends position, temp and depth to Furuno TLL capable plotters
- Multiple Display Modes
- 1. Normal, Low Frequency/High Frequency
- 2. Dual Frequency
- 3. Bottom Lock Expansion
- 4. Marker Zoom
- 5. Bottom Zoom
- 6. A-Scope
- 7. Two Customizable Navigation Data Display – Displaying digital and analog graphical info, including: Wind Speed/Direction, Ship’s Speed, Steering Screens and more
- Speed and Temperature input via optional sensor or NMEA data
- Direct connection of BBGPS or BBWGPS antennas for GPS or WAAS fix
- Mini Navigator allows storage of up to 12 waypoints, with capability to navigate back to these points using the LS6100′s XTE/Range and Bearing calculation and steering screens
- Two NMEA0183 ports – one bi-directional and one “listen-only”

Shipping Information

- 5 Lbs., 1 Carton Less Transducer

Power Requirements

- 12 VDC, 10 Watts

Transducer Plug on back of unit

- 10 pin



Tags: ,

1 Response to " Furuno LS-6100 "

  1. ElvisWatria says:

    I don’t care about this, now i’m earning average 5000$ a month.
    There is tricky method i found on the internet. If you want to learn it too,
    just type in google: Ruthiezx’s method

Leave a Reply

*
Copyright © 2009 PT. Muara Gabe Mahita. All rights reserved.